Silentbloky Powerflex PFF5-4601-60 PU Lagerung Querlenker 60mm BMW E46 - VÝPREDAJ

[Obr.: 89/41/17-silentbloky-powerflex-pff5-4601-60-pu-lagerung-querlenker-60mm-bmw-e46-vypredaj-1631003920.jpg]

Informace o produktu

Silentbloky Powerflex PFF5-4601-60 PU Lagerung Querlenker 60mm BMW E46 - VÝPREDAJ

Vhodné pre nasledujúce modely:
BMW E46 3 Series
BMW E46 3 Series Compact

Silentbloky sa používajú na uloženie podvozkových častí a patria k najnamáhanejším častiam použitých na automobile. Podstupujú enormné zaťaženie, nárazy a vo väčšine prípadov bez akejkoľvek údržby. Bežné silentbloky sú vyrábané z gumových zmesí, obsahujúcich prírodné produkty, ktoré podliehajú starnutiu, mäknú a stávajú sa príliš poddajnými, čo spôsobuje, že prestávajú odolávať zaťaženiu a nárazom. Výsledkom je ťažko nastaviteľné geometrie vozidla, zvýšené opotrebenie pneumatík, zníženú stabilitu pri brzdení a zlú ovládateľnosť vozidla. Tvrdé materiály, skôr používané k pretekárskym účelom, spôsobovali nepríjemný hluk a opotrebenie ďalších častí vozidla

Powerflex však už niekoľko rokov ponúka fantastickú náhradu - polyuretánové silentbloky !!! Vďaka vedecky vyvinuté polyuretánovej zmesi a jej technologickým výhodám, sú silentbloky Powerflex o 30% tvrdší ako nové, originálne, gumové silentbloky, zároveň ale absorbujú rovnaké množstvo hluku. Vďaka možnosti vymeniť niektoré silentbloky navyše ušetríte, pretože nebudete musieť meniť celé rameno alebo iný diel.

Powerflex The Black Series nová rada silentblokov vyvinutých pre Race, Rally a použitie pre okruhy - navrhnutý tak, že je najlepší.

Kód produktu: PFF5-4601-60/PF

EAN: 5055676501813

Poznámka:	Suitable for Non M3 - 66mm. Included within this handling pack are the following parts:PFF5-4601PFR5-3608PFR5-4610PFR5-4611 This bush is designed to fit the 66mm aluminium bush mounting bracket. Please ensure you have the correct size bush before fitting. PFF5-4601-60 is for the earlier models with 60 bore mounting - check diameter before ordering Please check Anti roll bar size before ordering Please check Anti roll bar size before ordering Please check Anti roll bar size before ordering Please check Anti roll bar size before ordering Please check Anti roll bar size before ordering Please check Anti roll bar size before ordering Fits CSL models Please check Anti roll bar size before ordering PFF5-5601 is a high performance option to PFF5-4601, and aimed at offering greater precision for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. This bush is designed to fit the 66mm aluminium bush. Please ensure you have the correct size bush before fitting. PFF5-5601-60 is a high performance option to PFF5-4601-60, and aimed at offering greater precision for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. PFF5-5601-60 is for the earlier models with 60mm bore mounting bracket. Please ensure you have the correct size bush before fitting. PFF5-5601G offers additional +0.5 of caster over PFF5-5601 and is a high performance option to PFF5-4601, and aimed at offering greater precision with improved geometry for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. This bush is designed to fit the 66mm aluminium bush. Please ensure you have the correct size bush before fitting. Testing during the development of this bush has indicated stiffness gains of 128% compared with the original rubber bush. Our Black Series part increases siffness by 28%, to give an 190% increase in stiffness over the original part PFF5-5601G-60 offers additional +0.5 of caster over PFF5-5601-60 and is a high performance option to PFF5-4601-60, and aimed at offering greater precision for people wanting the very best from their E46 or Z4. This new part, fitted to the rear of the front wishbone has a hard anodised aluminium outer shell with one of our unique low friction polyurethane centre bushes. The poly/alu combination creates a low friction rotating bush reducing the forces acting on the arm. Lower arm deflection has been decreased by reducing the compliant material within the aluminium shell. Results are less movement in the arm under cornering and braking, improving steering control and feel. PFF5-5601-60 is for the earlier models with 60mm bore mounting bracket. Please ensure you have the correct size bush before fitting. Testing during the development of this bush has indicated stiffness gains of 128% compared with the original rubber bush. Our Black Series part increases siffness by 28%, to give an 190% increase in stiffness over the original part Fits all X3, E46 and Z4 vehicles including M3 and Z4M. Fits into voids in original bush. Fits all X3, E46 vehicles except M3 and all Z4 except Z4M. Fits into voids in bush. PFR5-4615G Adjustable Rear Control Arm provides on car rear camber adjustment, allowing a +1.0 to -3.0 change for precision alignment - Useful to correct excessive camber on heavily lowered cars. This arm includes high performance polyurethane bushes that are suitable for road and track use without the comfort and longevity issues associated with spherical joints. PFR5-4615G replaces the original arm and bush OE numbers: 33326770813 and 33326770824 respectively. For a replacement bush only to fit in the original arm, please use PFR5-4616. This part replaces the bush in the original arm OE number: 33326770813 and 33326770824 respectively. To make adjustments to the vehicles camber angles for precision alignment, please use PFR5-4615G that replaces the original arm and bush. Please check anti roll bar diameter before ordering - Some part numbers may be described as for the rear but are also for the front anti roll bar on some models. It will not fit E24 6 series models built before 05/1982. Please check anti roll bar diameter before ordering - Some part numbers may be described as for the rear but are also for the front anti roll bar on some models. It will not fit E24 6 series models built before 05/1982. Please check anti roll bar diameter before ordering - Some part numbers may be described as for the rear but are also for the front anti roll bar on some models. It will not fit E24 6 series models built before 05/1982. Please check anti roll bar diameter before ordering - Some part numbers may be described as for the rear but are also for the front anti roll bar on some models. Please check anti roll bar diameter before ordering - Some part numbers may be described as for the rear but are also for the front anti roll bar on some models Suits cars with a standard and aftermarket rear shock absorber with a 10mm pin. Will not fit E36 and E46 Cabriolet models Suspension Brand Rear Shock Absorber Shaft Diameter Original BMW 10mm AST 10mm Bilstein HD, Sport, PSS Coilovers 10mm FK Coilovers 10mm H&R Coilovers 10mm JRZ RS 12mm Koni Sport 10mm KW V1, 2, 3 10mm ST Coilovers 10mm Tein Coilovers 12mm The above list is meant as a guide only. If your shock absorber brand is not listed,measuring the OD of the shaft will determine whether PFR5-5630-10 orPFR5-5630-12 should be fitted. Suits cars with aftermarket rear shock absorber with a 12mm pin. Will not fit E36 and E46 Cabriolet models. Suspension BrandRear Shock Absorber Shaft DiameterOriginal BMW10mmAST10mmBilstein HD, Sport, PSS Coilovers10mmFK Coilovers10mmH&R Coilovers10mmJRZ RS12mmKoni Sport10mmKW V1, 2, 310mmST Coilovers10mmTein Coilovers12mmThe above list is meant as a guide only. If your shock absorber brand is not listed,measuring the OD of the shaft will determine whether PFR5-5630-10 orPFR5-5630-12 should be fitted.
Skupina produktov:	Powerflex
Kód produktu:	PFF5-4601-60